Active oldest votes. Up vote 51 down vote accepted. Go to System Preferences - Accounts. Click the lock icon to unlock the preference pane. Right-click (or control-click) on user and select 'advanced options'.

I do not like to retype fish every time I start terminal. I want fish on by default. How can I set fish shell as my default shell on a Mac?

BarettLéo Léopold Hertz 준영Léo Léopold Hertz 준영

15 Answers

These are applicable to MacOS Sierra 10.12.5 (16F73) and probably some other recent and upcoming versions of MacOS.

1. chsh is not enough to change the default shell. Make sure you press Command+, while your terminal is open and change the 'Shells open with' option to 'Default login shell.'

2. In case of bash, make sure that you execute echo $BASH_VERSION to confirm you are running the intended version of bash. bash --version does not give you correct information.

1. sudo nano /etc/shells

2. add /usr/local/bin/fish to your list of shells

3. chsh -s /usr/local/bin/fish

user391339user391339

You can use chsh to change a user's shell.

Run the following code, for instance, to change your shell to Zsh

As described in the manpage, and by Lorin, if the shell is not known by the OS, you have to add it to its known list: /etc/shells.

AifAif

From Terminal:

1. Add Fish to /etc/shells, which will require an administrative password:

2. Make Fish your default shell with chsh:

From System Preferences:

1. User and Groups → ctrl-click on Current User → Advanced Options...

2. Change Login shell to /usr/local/bin/fish

3. Press OK, log out and in again

Paolo MorettiPaolo Moretti

Here's another way to do it:

Assuming you installed it with MacPorts, which can be done by doing:

Your shell will be located in /opt/local/bin/fish.

You need to tell OSX that this is a valid shell. To do that, add this path to the end of the /etc/shells file.

Once you've done this, you can change the shell by going to System Preferences -> Accounts. Click on the Lock to allow changes. Right-click on the account, and choose 'Advanced Options...'. In the 'Login shell' field, add the path to fish.

Lorin HochsteinLorin Hochstein

The only thing that worked for me was a combination of all these methods.

1. First I had to add fish to the /etc/shells file

2. Then I ran chsh -s /usr/local/bin/fish

3. Finally, I typed Command+, and added /usr/local/bin/fish to the default path there

Only after I had done all three things did fish start popping up as the default for new terminal windows.

techrafGumboGumbo

On macOS Mojave I had to do the following (using zsh as an example):

1. Open your terminal and press command+, (comma). This will open a preferences window.
2. The first tab is 'General'.
3. Find 'Shells open with' setting and choose 2nd option which needs complete path to the shell.
4. Paste the link to your fish command, which generally is /usr/local/bin/fish.

I am using macOS Sierra.

zx485

the chsh program will let you change your default shell. It will want the full path to the executable, so if your shell is fish then it will want you to provide the output given when you type which fish.

You'll see a line starting with 'Shell:'. If you've never edited it, it most likely says 'Shell: /bin/bash'. Replace that /bin/bash path with the path to your desired shell.

When in the terminal, open the terminal preferences using Command+,.

On the Setting Tab, select one of the themes, and choose the shell tab on the right.

You can set the autostart command fish.

techraf

just change that value (with the write command in dscl).

Ordiel

How to get the latest version of bash on modern macOS (tested on Mojave).

Then you are ready to get vim style tab completion which is only available on bash>=4 (current version in brew is 5.0.2

Bruno BronoskyBruno Bronosky

In case you are having troubles with the other ways, worked on mac Mojave but should generally work.

add the output path to 'System Preferences > Users & Groups > right click user, Advanced Options' Paste the result from which into 'Login shell:'

This work for me on fresh install of mac osx (sierra):

1. Define current user as owner of shells

2. Add Fish to /etc/shells

3. Make Fish your default shell with chsh

4. Redefine root as owner of shells

protected by Léo Léopold Hertz 준영Jan 3 '17 at 18:27

Thank you for your interest in this question. Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).
Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged macosterminalfish or ask your own question.

Writing a shell script is like riding a bike. You fall off and scrape your knees a lot at first. With a bit more experience, you become comfortable riding them around town, but also quickly discover why most people drive cars for longer trips.

Shell scripting is generally considered to be a glue language, ideal for creating small pieces of code that connect other tools together. While shell scripts can be used for more complex tasks, they are usually not the best choice.

If you have ever successfully trued a bicycle wheel (or paid someone else to do so), that’s similar to learning the basics of shell scripting. If you don’t true your scripts, they wobble. Put another way, it is often easy to write a script, but it can be more challenging to write a script that consistently works well.

This chapter and the next two chapters introduce the basic concepts of shell scripting. The remaining chapters in this document provide additional breadth and depth. This document is not intended to be a complete reference on writing shell scripts, nor could it be. It does, however, provide a good starting point for beginners first learning this black art.

Shell Script Dialects

There are many different dialects of shell scripts, each with their own quirks, and some with their own syntax entirely. Because of these differences, the road to good shell scripting can be fraught with peril, leading to script failures, misbehavior, and even outright data loss.

To that end, the first lesson you must learn before writing a shell script is that there are two fundamentally different sets of shell script syntax: the Bourne shell syntax and the C shell syntax. The C shell syntax is more comfortable to many C programmers because the syntax is somewhat similar. However, the Bourne shell syntax is significantly more flexible and thus more widely used. For this reason, this document only covers the Bourne shell syntax.

The second hard lesson you will invariably learn is that each dialect of Bourne shell syntax differs slightly. This document includes only pure Bourne shell syntax and a few BASH-specific extensions. Where BASH-specific syntax is used, it is clearly noted.

The terminology and subtle syntactic differences can be confusing—even a bit overwhelming at times; had Dorothy in The Wizard of Oz been a programmer, you might have heard her exclaim, 'BASH and ZSH and CSH, Oh My!' Fortunately, once you get the basics, things generally fall into place as long as you avoid using shell-specific features. Stay on the narrow road and your code will be portable.

Some common shells are listed below, grouped by script syntax:

Bourne-compatible shells

• sh

• bash

• zsh

• ksh

C-shell-compatible shells

• csh

• tcsh

• bcsh (C shell to Bourne shell translator/emulator)

Many of these shells have more than one variation. Most of these variations are denoted by prefixing the name of an existing shell with additional letters that are short for whatever differentiates them from the original shell. For example:

• The shell pdksh is a variant of ksh. Being a public domain rewrite of AT&T's ksh, it stands for 'Public Domain Korn SHell.' (This is a bit of a misnomer, as a few bits are under a BSD-like open source license. However, the name remains.)

• The shell tcsh is an extension of csh. It stands for the TENEX C SHell, as some of its enhancements were inspired by the TENEX operating system.

• The shell bash is an extension of sh. It stands for the Bourne Again SHell. (Oddly enough, it is not a variation of ash, the Almquist SHell, though both are Bourne shell variants. This should not be confused with the dash shell—an ash-derived shell used in some Linux distributions—whose name stands for the Debian Almquist SHell.)

And so on. In general, with the exception of csh and tcsh, it is usually safe to assume that any modern login shell is compatible with Bourne shell syntax.

Note: Because the C shell syntax is not well suited to scripting beyond a very basic level, this document does not cover C shell variants in depth. For more information, see She Sells C Shells.

She Sells C Shells

The C shell is popular among some users as a shell for interacting with the computer because it allows simple scripts to be written more easily. However, the C shell scripting language is limited in a number of ways, many of which are hard to work around. For this reason, use of the C shell scripting language for writing complex scripts is not recommended. For more information, read “CSH Programming Considered Harmful” at http://www.faqs.org/faqs/unix-faq/shell/csh-whynot/. Although many of the language flaws it describes are fixed by some modern C shells, if you are writing a script that must work on multiple computers across different operating systems, you cannot always guarantee that the installed C shell will support those extensions.

However, the C shell scripting language has its uses, particularly for writing scripts that set up environment variables for interactive shell environments, execute a handful of commands in order, or perform other relatively lightweight chores. To support such uses, the C shell syntax is presented alongside the Bourne shell syntax within this 'basics” chapter where possible.

Outside of this chapter, this document does not generally cover the C shell syntax. If after reading this, you still want to write a more complex script using the C shell programming language, you can find more information in on the C shell in the manual page for csh.

Shell Variables and Printing

What follows is a very basic shell script that prints “Hello, world!” to the screen:

The first thing you should notice is that the script starts with ‘#!’. This is known as an interpreter line. If you don’t specify an interpreter line, the default is usually the Bourne shell (/bin/sh). However, it is best to specify this line anyway for consistency.

The second thing you should notice is the echo command. The echo command is nearly universal in shell scripting as a means for printing something to the user’s screen. (Technically speaking, echo is generally a shell builtin, but it also exists as as standalone command, /bin/echo. You can read more about the difference between the builtin version and the standalone version in echo and Use Shell Builtins Wherever Possible.)

If you’d like, you can try this script by saving those lines in a text file (say “hello_world.sh”) in your home directory. Then, in Terminal, type:

Of course, this script isn’t particularly useful. It just prints the words “Hello, world!“ to your screen. To make this more interesting, the next script throws in a few variables.

Type or paste this script into the text editor of your choice (see Creating Text Files in Your Home Directory for help creating a text file) and save the file in your home directory in a file called test.sh.

Once you have saved the file in your home directory, type ‘chmod a+x test.sh’ in Terminal to make it executable. Finally, run it with ‘./test.sh leaders’. You should see “Hello, world leaders!” printed to your screen.

This script provides an example of a variable assignment. The variable $1 contains the first argument passed to the shell script. In this example, the script makes a copy and stores it into a variable called FIRST_ARGUMENT, then prints that variable.

You should immediately notice that variables may or may not begin with a dollar sign, depending on how you are using them. If you want to dereference a variable, you precede it with a dollar sign. The shell then inserts the contents of the variable at that point in the script. For all other uses, you do not precede it with a dollar sign.

Important: You generally do not want to prefix the variable on the left side of an assignment statement with a dollar sign. Because FIRST_ARGUMENT starts out empty, if you used a dollar sign, the first line:

would be expanded by the shell into the following complete gibberish:This is clearly not what you want (and produces an error). Because of the order in which the statement is evaluated, the above assignment statement would still fail with an error even if FIRST_ARGUMENT were nonempty. (If you really want to assign a value to a variable whose name is in a different variable, use eval, as described in Using the eval Builtin for Data Structures, Arrays, and Indirection.)

You should also notice that the argument to echo is surrounded by double quotation marks. This is explained further in the next section, Using Arguments And Variables That Contain Spaces.

C Shell Note: The syntax for assignment statements in the C shell is rather different. Instead of an assignment statement, the C shell uses the set and setenv builtins to set variables as shown below:

The functional difference between set and setenv is described in Exporting Shell Variables.

Using Arguments And Variables That Contain Spaces

Take a second look at the script from the previous section:

Notice that the echo statement is followed by a string surrounded by quotation marks. Normally, the shell uses spaces to separate arguments to commands. Outside of quotation marks, the shell would treat “Hello,” and “world” as separate arguments to echo.

By surrounding the string with double quote marks, the shell treats the entire string as a single argument to echo even though it contains spaces.

To see how this works, save the script above as test.sh (if you haven’t already), then type the following commands:

The first line above prints “Hello, world leaders!” because the space after “leaders” ends the first argument ($1). Inside the script, the variable $1 contains “leaders”, $2 contains “and”, and $3 contains “citizens”.

The second line above prints “Hello, world leaders and citizens!” because the quotation marks on the command line cause everything within them to be grouped as a single argument.

Notice also that there are similar quotation marks on the right side of the assignment statement:

With most modern shells, these double quotation marks are not required for this particular assignment statement (because there are no literal spaces on the right side), but they are a good idea for maximum compatibility. See Historical String Parsing in Historical Footnotes and Arcana to learn why.

When assigning literal strings (rather than variables containing strings) to a variable, however, you must surround any spaces with quotation marks. For example, the following statement does not do what you might initially suspect:

If you type this statement, the Bourne shell gives you an error like this:

The reason for this seemingly odd error is that the assignment statement ends at the first space, so the next word after that statement is interpreted as a command to execute. See Overriding Environment Variables for Child Processes (Bourne Shell) for more details.

Instead, write this statement as:

Using quotation marks is particularly important when working with variables that contain filenames or paths. For example, type the following commands:

The above example creates a directory in /tmp called “My Folder”. (Don’t worry about deleting it because /tmp gets wiped every time you reboot.) It then attempts to list the files in that directory. The first time, it uses quotation marks. The second time, it does not. Notice that the shell misinterprets the command the second time as being an attempt to list the files in /tmp/My and the files in Folder.

Handling Quotation Marks in Strings

In modern Bourne shells, expansion of variables, occurs after the statement itself is fully parsed by the shell. (See Historical String Parsing in Historical Footnotes and Arcana for more information.) Thus, as long as the variable is enclosed in double quote marks, you do not get any execution errors even if the variable’s value contains double-quote marks.

However, if you are using double quote marks within a literal string, you must quote that string properly. For example:

C Shell Note: The C shell handling of backslashes within double-quoted strings is different. In the C shell, the previous example should be changed to:

to achieve the desired effect. This difference is described further in Parsing, Variable Expansion, and Quoting.

This quoting technique also applies to literal strings within commands entered on the command line. For example, using the script from earlier in Shell Variables and Printing, the command:

prints the phrase “Hello, world “leaders”!”

The details of quotes as they apply to variable expansion are explained in Parsing, Variable Expansion, and Quoting. (Variable safety with shells that predate this behavior is generally impractical. Fortunately, the modern behavior has been the norm since the mid-1990s.)

Shell scripts also allow the use of single quote marks. Variables between single quotes are not replaced by their contents. Be sure to use double quotes unless you are intentionally trying to display the actual name of the variable. You can also use single quotes as a way to avoid the shell interpreting the contents of the string in any way. These differences are described further in Parsing, Variable Expansion, and Quoting.

Exporting Shell Variables

One key feature of shell scripts is that variables are typically limited in their scope to the currently running script. The scoping of variables is described in more detail in Subroutines, Scoping, and Sourcing. For now, though, it suffices to say that variables generally do not get passed on to scripts or tools that they execute.

Normally, this is what you want. Most variables in a shell script do not have any meaning to the tools that they execute, and thus represent clutter and the potential for variable namespace collisions if they are exported. Occasionally, however, you will find it necessary to make a variable's value available to an outside tool. To do this, you must export the variable. These exported variables are commonly known as environment variables because they affect the execution of every script or tool that runs but are not part of those scripts or tools themselves.

A classic example of an environment variable that is significant to scripts and tools is the PATH variable. This variable specifies a list of locations that the shell searches when executing programs by name (without specifying a complete path). For example, when you type ls on the command line, the shell searches in the locations specified in PATH (in the order specified) until it finds an executable called ls (or runs out of locations, whichever comes first).

The details of exporting shell variables differ considerably between the Bourne shell and the C shell. Thus, the following sections explain these details in a shell-specific fashion.

Using the export Builtin (Bourne Shell)

Generally speaking, the first time you assign a value to an environment variable such as the PATH variable, the Bourne shell creates a new, local copy of this shell variable that is specific to your script. Any tool executed from your script is passed the original value of PATH inherited from whatever script, tool, or shell that launched it.

With the BASH shell, however, any variable inherited from the environment is automatically exported by the shell. Thus, in some versions of OS X, if you modify inherited environment variables (such as PATH) in a script, your local changes will be seen automatically by any tool or script that your script executes. Thus, in these versions of OS X, you do not have to explicitly use the export statement when modifying the PATH variable.

Because different Bourne shell variants handle these external environment variables differently (even among different versions of OS X), this creates two minor portability problems:

• A script written without the export statement may work on some versions of OS X, but will fail on others. You can solve this portability problem by using the export builtin, as described in this section.

• A shell script that changes variables such as PATH will alter the behavior of any script that it executes, which may or may not be desirable. You can solve this problem by overriding the PATH environment variable when you execute each individual tool, as described in Overriding Environment Variables for Child Processes (Bourne Shell).

To guarantee that your modifications to a shell variable are passed to any script or tool that your shell script calls, you must use the export builtin. You do not have to use this command every time you change the value; the variable remains exported until the shell script exits.

For example:

Either of these statements has the same effect—specifically, they export the local notion of the PATH environment variable to any command that your script executes from now on. There is a small catch, however. You cannot later undo this export to restore the original global declaration. Thus, if you need to retain the original value, you must store it somewhere yourself.

In the following example, the script stores the original value of the PATH environment variable, exports an altered version, executes a command, and restores the old version.

If you need to find out whether an environment variable (whether inherited by your script or explicitly set with the export directive) was set to empty or was never set in the first place, you can use the printenv command to obtain a complete list of defined variables and use grep to see if it is in the list. (You should note that although printenv is a csh builtin, it is also a standalone command in /usr/bin.)

For example:

The resulting variable will contain 1 if the variable is defined in the environment or 0 if it is not.

Overriding Environment Variables for Child Processes (Bourne Shell)

Because the BASH Bourne shell variant automatically exports all variables inherited from its environment, any changes you make to preexisting environment variables such as PATH are automatically inherited by any tool or script that your script executes. (This is not true for other Bourne shell variants; see Using the export Builtin (Bourne Shell) for further explanation.)

While automatic export is usually convenient, you may sometimes wish to change a preexisting environment variable without modifying the environment of any script or tool that your script executes. For example, if your script executes a number of tools in /usr/local/bin, it may be convenient to change the value of PATH to include /usr/local/bin. However, you may not want child processes to also look in /usr/local/bin.

Change Mac Shell Manual Free

This problem is easily solved by overriding the environment variable PATH on a per-execution basis. Consider the following script:

This script prints the value of the variable MYVAR. Normally, this variable is empty, so this script just prints a blank line. Save the script as printmyvar.sh, then type the following commands:

Notice that the assignment statement MYVAR=7 applies only to the command that follows it. The value of MYVAR is altered in the environment of the command ./printmyvar.sh, so the script prints the number 7. However, the original (empty) value is restored after executing that command, so the echo statement afterwards prints an empty string for the value of MYVAR.

Thus, to modify the PATH variable locally but execute a command with the original PATH value, you can write a script like this:

Using the setenv Builtin (C shell)

In the C shell, variables are exported if you set them with setenv, but not if you set them with set. Thus, if you want your shell variable modifications to be seen by any tool or script that you call, you should use the setenv builtin. This builtin is the C shell equivalent to issuing an assignment statement with the export builtin in the Bourne shell.

If you want your shell variables to only be available to your script, you should use the set builtin (described in Shell Variables and Printing). The set builtin is equivalent to a simple assignment statement in the Bourne shell.

Notice that the local variable version requires an equals sign (=), but the exported environment version does not (and produces an error if you put one in).

To remove variables in the C shell, you can use the unsetenv or unset builtin. For example:

This will generate an error message. In the C shell, it is not possible to print the value of an undefined variable, so if you think you may need to print the value later, you should set it to an empty string rather than using unset or unsetenv.

If you need to test an environment variable (not a shell-local variable) that may or may not be part of your environment (a variable set by whatever process called your script), you can use the printenv builtin. This prints the value of a variable if set, but prints nothing if the variable is not set, and thus behaves just like the variable behaves in the Bourne shell.

For example:

This prints X is ' if the variable is either empty or undefined. Otherwise, it prints the value of the variable between the quotation marks.

If you need to find out if a variable is simply empty or is actually not set, you can also use printenv to obtain a complete list of defined variables and use grep to see if it is in the list. For example:

The resulting variable will contain 1 if the variable is defined in the environment or 0 if it is not.

Overriding Environment Variables for Child Processes (C Shell)

Unlike the Bourne shell, the C shell does not provide a built-in syntax for overriding environment variables when executing external commands. However, it is possible to simulate this either by using the env command.

The best and simplest way to do this is with the env command. For example:

As an alternative, you can use the set builtin to make a temporary copy of any variable you need to override, change the value, execute the command, and restore the value from the temporary copy.

You should notice, however, that whether you use the env command or manually make a copy, the PATH variable is altered prior to searching for the command. Because the PATH variable controls where the shell looks for programs to execute, you must therefore explicitly provide a complete path to the ls command or it will not be found (unless you have a copy in /usr/local/bin, of course). The PATH environment variable is explained in Special Shell Variables.

As a workaround, you can determine the path of the executable using the which command prior to altering the PATH environment variable.

Or, using env:

The use of the backtick (`) operator in this fashion is described in Inline Execution.

Security Note:If your purpose for overriding an environment variable is to prevent disclosure of sensitive information to a potentially untrusted process, you should be aware that if you use setenv for the copy, the called process has access to that temporary copy just as it had access to the original variable. To avoid this, be sure to create the temporary copy using the set builtin instead of setenv.

Deleting Shell Variables

For the most part, in Bourne shell scripts, when you need to get rid of a variable, setting it to an empty string is sufficient. However, in long-running scripts that might encounter memory pressure, it can be marginally useful to delete the variable entirely. To do this, use the unset builtin.

For example:

The unset builtin can also be used to delete environment variables.

C Shell Note: The C shell unset builtin is identical except that it cannot be used to delete environment variables. Use unsetenv instead, as shown in Overriding Environment Variables for Child Processes (C Shell).

Change Mac Shell Manual Online

Also, in C shell, if you try to use a deleted variable, it is considered an error. (In Bourne shell, an unset variable is treated like an empty string.)

Mac Makeup Shell

Copyright © 2003, 2014 Apple Inc. All Rights Reserved. Terms of Use | Privacy Policy | Updated: 2014-03-10